Chapter 4 of Tasting Beer discusses five qualities of beer—gravity (and how it relates to ABV%), color, bitterness, clarity, and carbonation/foam. Let's start with gravity, the quality that I didn't even know existed until I started reading this book.
We talked a few weeks ago about how the unfermented wort has a bunch of starches and sugars in it, ripe for the yeast to take and exchange for alcohol. Gravity, then, is the measure of how much of that "stuff" is in the wort, compared to the water. The reasoning goes that the more malt in the wort, the more alcohol is going to be produced (and consequentially, the more bitter hops will be required to balance the flavor, and then further consequentially, the more flavor will be packed into the beer).
There are two basic numerical systems to describe how high or low the gravity is. The first, and simplest, one is called "degrees Plato" (Plato had his hands on all kinds of math, including beer math). It measures the amount of solids there are in the whole wort, like as in percentage. So if a wort is 10% solids, then the wort is 10 dP. 12% solids is 12dP, and so on.
The other measurement is called "original gravity," or OG. It is more complicated, and so of course it is the more commonly used (the original calculations were created using English, and so OG is as commonly used as the English language is). OG is a fraction, placing the weight of the wort over the weight of pure water, and coming up with a ratio.
Since the wort is going to be heavier than water, since wort is water plus other stuff, then the ratio is always going to be >1 (should I say always at this point? I guess you never know with beer...). 10dP is about 1.040 OG, to give you an idea.
There is a third numerical system used by the Belgians that is closely related to OG. They use "Belgian degrees," and basically the take the "1.0" part of the OG ratio out of it. E.g. 1.040 OG is 4 Belgian degrees. 1.089 OG would be 8.9 Belgian degrees, and so on. Is this where yesterday's Abt 12 got its name? Was its gravity 1.120 OG before fermentation? Probably! (But just as likely not, since Tasting Beer notes that a lot of the Belgian recipes are old and inaccurate, but that's getting off track.)
Okay, so gravity will give you a good indication of what the ABV (alcohol by volume) is going to be, at least relatively. The higher the gravity before fermentation, the more alcohol is going to be fermented, and thus, the higher the ABV. But it's not a simple calculation. You knew that already. We just spent weeks talking about all the varying factors that are to be considered in the brewing process. Maybe there are a bunch of complex starches in the wort (higher OG) that can't be fermented by the yeast (lower ABV). Maybe there isn't a lot of sugar (lower OG), but the yeast are in a higher temperature environment and produce a lot more alcohol (higher ABV).
So I suppose when it comes to "gravity" as a measurement in beer, my question is—what is the point? I get that a 1.040 OG beer will most likely have a lower ABV than a 1.080 OG beer, but if I'm so worried about how much alcohol is in a beer, then why not just look at the ABV%?
Case in point: none of the beers in my refrigerator currently listed the gravity of the beer, so I picked at random. I split a Hip Czech with Pammy, and we both appreciated its refreshing taste and slightly spicy aftertaste (I mentioned the famous Czech Saaz hops a while ago). It's ABV is 4.8%. I could not find information on its OG or dP or anything like that. We can estimate, of course—4.8% ABV is probably around 1.048 OG... but not necessarily.
If Victory doesn't want me to know the gravity, then I'm not going to lose sleep over it. Sorry to have wasted your time.
NOTES
BEER: Hip Czech (great pun)
GENRE: Bohemian Pilsner
ABV: 4.8%
BREWED BY: Victory Brewing Company
LOCATION: Downingtown, PA
PURCHASED AT: Capital Beer
PAIRED WITH: Pam's famous chicken and stuffing
GRADE: 3 pukes out of 5
BEER COUNT: 68

No comments:
Post a Comment